used Broadcast / DSNG
Tandberg TT1260 MPEG-2 SD Receiver
Artikelnr.: 77066
Lagerbestand: 1
Gewicht: 0,00 kg
only SD not HD
Inputs and outputs see photo on the rear
The TT1260 offers a vast variety of input interface options, making the
unit suitable for connecting to almost every type of network. Highlights
include support for the new DVB-S2 standard as well as legacy
DVB-S and DVB-DSNG satellite transmission standards. For
connection to telco networks, the receiver can also be fitted with
G.703 or IP inputs.
Secure Transmission
Security of content is all-important - something that is taken seriously
by the TT1260. The TT1260 supports all major encryption systems
including BISS 1 & E, RAS, Common Interface and TANDBERG
DirectorV5 CA.
Transfer of Private Data
As well as providing video and audio capabilities, the TT1260 also
provides simultaneous carriage of additional data services. The
TT1260 can receive several data formats including low-speed,
high-speed and high-speed over IP data.
TT1260 – Common Interface (TT1260/CIBAS)
The Common Interface (CI) version can accept one CA module (CAM)
enabling the user to select the desired CA system and have the
flexibility to change the CA system at a later stage.
TT1260 – Common Interface, 48VDc (TT1260/CIBAS/48V)
Base unit as the TT1260/CIBAS but with 48Vdc power supply for telco
installations.
TT1260 - Director (TT1260/DIRBAS)
The TANDBERG Director version of the TT1260 enables a secure
transmission of valuable content with the added benefit of over-air
control reducing the need for local operators.
Standard features for base units:
• Dual SDI output with embedded de-compressed audio and VBI
• Dual analog (PAL/NTSC) BNC outputs
• Dual ASI transport stream outputs
• Frame synchronization input
• Remote control via SNMP or web page
• Single alarm relay
• Descrambling of MPEG-4 AVC via a CAM
• CAM menu browsing via web browser
______________________________________________________________________
Video and Audio Formats
Decoding of one video service
422P@ML up to 50 Mbps
MP@ML up to 15 Mbps
(4:2:0 video only mode option available)
Audio:
Decoding of two audio PIDs
Musicam: Analog and digital output
Linear 20bit PCM@48 kHz: Analog and digital
output:
Dolby® AC-3 2.0: Analog and digital output
Dolby® AC-3 5.1: Digital pass-through
Dolby® E: Digital pass-through
All de-compressed audio embedded in SDI
Dual Composite and Dual SDI video output
Simultaneous analogue and digital audio output
Extensive VBI support, including VBI in picture
VBI inserted in both composite and SDI output
_____________________________________________________________________
DVB QPSK Input
Standard: EN300 421
Connector: 2 x F-type (F), 75 Ohm
Frequency range: 950 - 2150MHz
Symbol rates: 1 - 45 Msyms
LNB power: 13V, 18V or off, 22 kHz on or off
DVB ASI Input
Standard: EN50083-9
Connector: 2 x BNC (F), 50Ω
Max input rate: 160 Mbps
Packet Length: Auto-detect 188/204 byte packets
TTV G.703
Connector: BNC (F)
Network: G.703 compliant PDH
Input: E3 or DS-3 (selectable)
Bit-rates: 34 or 45 Mbps versions
MPEG over IP
Connector: 1x RJ 45
Format: 10/100BaseT
FEC: ProMPEG
Gigabit MPEG over IP (Check availability)
Connector: 2x RJ 45
Format: 100/1000BaseT
______________________________________________________________________
FEC: ProMPEG
DVB-DSNG Higher Order Modulation
Standard: EN300 421, EN301 210
Connector: 4 x F-type (F), 75 Ohm
Frequency Range: 950 – 2150 MHz
Symbol Rate: 5 - 45 Msyms
FEC, BPSK/QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
FEC, 8PSK: 2/3, 5/6, 8/9
FEC, 16QAM: 3/4, 7/8
LNB power: 13V, 18V or off, 22 kHz on or off
DVB-S2
Standard: EN300 421, EN302 307
Connector: 4 x F-Type (F), 75 Ohm
Frequency Range: 950 – 2150 MHz
Symbol Rate: 1 - 45 Msyms (DVB-S)
Symbol Rate: 5 - 31 Msyms (DVB-S2)
Symbol Rate: 1 - 31 Msyms (DVB-S2) (option)
Bit-rate: 81 Mbps Max (DVB-S2)
FEC, DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
FEC, DVB-S2 QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9,
9/10
FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DVB-S2 FEC Frames: Normal Frames
LNB power: 13V, 18V or off, 22 kHz on or off
DVBS2/ASI/IF/C Option
Inputs: 3x L-band
1x IF BNC (F) 75 Ohm
2x ASI BNC (F) 75 Ohm
IF Input Freq Range: 50 – 180 MHz (Monitor input)
Constellation Output: 2x BNC I/Q (F)
DVB-T COFDM Input
Connector: F-type (F), 75Ω
Frequency range: 47-862 MHz
Channel bandwidth: 6/7/8 MHz switchable
Carrier mode: 2K and 8K selectable
Carrier modulation: QPSK, 16QAM, 64QAM auto
detected
Hierarchy: High/Low
Spectral inversion: Normal/Inverted
Frame Synchronization
Connector: BNC (F)
Outputs
DVB ASI Output
Connector: BNC (F) 75Ω
______________________________________________________________________
Sustained transport stream data rate: 160 Mbps
(CA system dependent)
Enable/disable descrambling of selected service
Data
RS-232 Low speed data (max. 38.4 Kbps)
RS-422 High speed data (max. 2048 Kbps)
Ethernet high speed data (max. 5000 Kbps)
Tandberg Proprietary Data Piping only
Alarm Relay
Alarm Relays (summary and user customizable)
Connector: 9D-type, (M)
Conditional Access Options
DVB Common Interface
TANDBERG Director V4, V5
TANDBERG RAS-1 & 2
BISS mode-1 & E
MPEG-4 decryption via DVB CI
Control
Front panel keypad and LCD
nCompass Control and Monitoring
Remote control via RS-232, TANDBERG remote
control protocol
Remote control via RS-232 / RS-485, fully
implemented Alteia remote control protocol
TANDBERG Director inband remote control (only
available with TANDBERG Director CA version)
Web browser control
Lager-Nr.: 1272, 1273 1274